...send and receive pairs are crossed between Connector A to Connector B on either end of the cable. There are two standards for the pairing of Crossover cables, one for the 568-A  & 568-B and one for USOC. • Learn more: • UTP Cable and colour drift

...requires bundles of cables, and managing all those cables from inside a telecommunications closet can be a daunting task. To connect cable bundles to rackmounted equipment (like patch panels, hubs, switches, or routers), you need to direct the b...

Cable termination • Cable termination • Carefully remove the jacketing from the cable and expose one inch of the insulated wire conductors. Do not remove any insulation from the conductors. When the RJ-45 connector is crimped, the contacts ins...

Breakout-style cables. • Breakout-style cables • Eliminating need for patch cables • With breakout- or fanout-style cables, the fibres are packaged individually or in groups. This enables you to divide cables to serve users with individual fib...

Cable testers from simple to advanced. • Cable testers from simple to advanced • Testing LAN Cabling installation • Cabling installed in an office LAN must support strict parameters to handle Ethernet traffic. Installers rely on different type...

...Optic Mode-Conditioning Cables. • Launching a single-mode laser into the centre of a multimode fibre can confuse the receiver at the other end if multiple signals are generated. Differential Mode Delay (DMD) effects create these multiple signals, wh...

Pinning charts for Tail-Circuit, Null-Modem, and Cross-Pinned Cables

DisplayPort cable • DisplayPort cable • DisplayPort is a digital video interface that was designed by the Video Electronics Standards Association (VESA) in 2006 and has been produced since 2008. It competes directly with HDMI®. Unlike HDMI, ho...

...Common ground • The cables share many characteristics. Although 50-micron fibre cable features a smaller core (the light-carrying portion of the fibre), both 50- and 62.5-micron cable use the same cladding diameter of 125 microns. Because they h...

Single-Mode Fibre Optic Cable • Single-Mode Fibre Optic Cable • Multimode fibre cable has multiple modes of propagation—that is, several wavelengths of light are normally used in the fibre core. In contrast, single-mode fibre cable has only on...